Task impact according to QDS logging setting.

[qwebnm]

When I set the QDS logging setting from Normal to No, a Task Error came out.

1) Does the QDS logging setting really affect the task?
2) Can you check the log to see if the problem is QDS or something else?

I can't get the log file, so I'll attach it as a picture!
please check!

[Bill_Britt · Accepted solution]

Hi,

When I disable logging the task runs and there is a warning.  No logs are produced.  

Can not read the logs (screen captures) you uploaded.  

[Maria_Halley · Accepted solution]

@qwebnm 

The log for task1 says that the task was manually aborted. That means that someone stopped the task before it was done.

[Bill_Britt]

Hi,

That is correct.

[qwebnm]

Can you tell me where it says the job was manually aborted?

Please help if possible!

[Chip_Matejowsky · Accepted solution]

Hi @qwebnm,

The screen shot (task1-4.png) you provided of the task log states TryAbort Triggered by 'ManualAbortTrigger'. 

As I previously suggested in your other posts, it would be better if you provided the actual logs rather than screen captures of the logs. These would be much easier for us to review and assist you. Thanks!

Best Regards

[qwebnm]

I wanted to provide the actual log, but I couldn't get it, so I attached it as a picture.

log : TryAbort triggered by 'ManualAbortTrigger'

Are you saying that the log is the log that the job was manually aborted?
1) Can a log like this come out when manually stopped due to performance such as system hardware or network?
2) Or does this message appear only when the user manually stops it?

If possible, please let me know!

[Chip_Matejowsky · Accepted solution]

Hi @SH777,

This entry TryAbort Triggered by 'ManualAbortTrigger' is only returned when a task is manually aborted. If a network or system issue is encountered, typically the logging just stops at the point of the issue. Make sense?

Best Regards