upgrading from Nov 2020 SR1 to May 2022 SR3

[mstoler]

Hello,

I wanted to confirm that I can upgrade directly from Nov 2020 SR1 to May 2022 SR3.

My question is do I need to first install May 2022 Initial Release and then SR3 or can I go directly to SR3.

Thank You,

Michael

[Frank_S]

Hi Michael,

You can go straight to NPrinting May 2022 SR 3. Each Service Release is a full installation. Initial Release is not required.

https://community.qlik.com/t5/Release-Notes/Qlik-NPrinting-Release-Notes-May-2022-Service-Release-3/...

Upgrade Notes:

To upgrade to Qlik NPrinting May 2022 SR3, you must start from one of the following versions:

• May 2022 SR2 (22.15.8)
• May 2022 SR1 (22.15.5)
• May 2022 IR (22.15.2)
• May 2022 Technical Preview (22.15.0)
• May 2021 SR5 (21.14.10)
• May 2021 SR4 (21.14.8)
• May 2021 SR3 (21.14.7)
• May 2021 SR2 (21.14.5)
• May 2021 SR1 (21.14.4)
• May 2021 (21.14.3)
• May 2021 Technical Preview (21.14.1)
• February 2021 (21.0.0)
• February 2021 Technical Preview (20.50.1)
• November 2020 SR1 (20.39.4)
• November 2020 (20.39.3)
• November 2020 Technical Preview (20.39.1)
• September 2020 (20.31.2)
• September 2020 Technical Preview (20.31.1)
• June 2020 SR1 (20.19.5)
• June 2020 (20.19.3)
• June 2020 Technical Preview (20.19.0)
• April 2020 (20.10.2)
• April 2020 Technical Preview (20.10.0)
• February 2020 SR1 (20.0.3)
• February 2020 (20.0.2)
• February 2020 Technical Preview (20.0.0)

[Frank_S · Accepted solution]

Make sure to check QlikView and or Qlik Sense compatibility before upgrading

• https://help.qlik.com/en-US/nprinting/May2022/Content/NPrinting/DeployingQVNprinting/System-requirem...

Kind regards...

[mstoler]

Hello,

Thank You.  I am also upgrading Qlik Sense to Aug 2022 SR 5. 

We should be good.

Thank You,

Michael

[Frank_S]

No worries!