Hi everyone,

I'm working on a project that involves dissolving areas based on UK postcodes. I've been following the official guide, but I keep encountering an error message that says "unknown column in dissolve table."

To help troubleshoot, I've attached a sample dataset containing "Postcode" and "Place Name" columns. Ideally, I'd like to populate polygon shapes for each place name based on the corresponding postcode.

Any advice or guidance on how to resolve the error  would be greatly appreciated. Thanks in advance for your help!

Using a SQL Query on a SQL database returns the following data:

With the following result:

But executing the same SQL query into Qlikview returns the following:

toetsOnveranderd - Test with no change

toetsText - Using Text script formula to get text property

toetsJippo  - Self help method to force test property

With the following outcome in Qlikview:

It seems that the 'raw' data in the SQL database is 0965 (OneID,toetsOnveranderd)

But the SQL query in SQL returns (0965,965) (?)

And it seems that the script formula "Text" first identify the property is integer makes it a number and the concerts it to text 0965 -> 965 -> "965" 

[It must be noted that data input is from multiple sources into the SQL database].

This outcome of the usage of the the text formula vs 'raw' data causes a different result/outcome.

Any idea how to "fix" this?

Hi Community,

I'm currently working with Oracle 19c as a source, and I've some tables without primary keys. Need to configure a task for a full load with Change Data Capture (CDC). How should I proceed in managing the absence of primary keys in this scenario? Your guidance on handling this situation would be greatly appreciated.

Regards,

Pranita 

I have a master measure (let's call it "B"), which references another master measure (let's call it "A"). Master measure "B" works fine.

Then when I create a new master measure "C" (which references master measure "B"), I get the error referenced measure, which Qlik has documented here. https://community.qlik.com/t5/Official-Support-Articles/Error-in-expression-Error-referenced-measure/ta-p/1845945

I've made sure my master measure names are unique and non-overlapping with other names. Is nesting master measures more than one level deep not supported by Qlik?

Hi all,

I have a field named sold_date and want to create another that is a boolean. 1 if sold_date is 2 years ago from today. The sold date format is MM/DD/YYYY in the sheet of Qlik.

I tried this but the new field is always 0.

if(Date#("sold_date", 'MM/DD/YYYY') = Date(MonthStart(Today(), -24)), 1, 0) as last_10d_2y,

Just in case, the script I have at the beginning of the load editor is this one:

SET ThousandSep=',';
SET DecimalSep='.';
SET MoneyThousandSep=',';
SET MoneyDecimalSep='.';
SET MoneyFormat='$ ###0.00;-$ ###0.00';
SET TimeFormat='h:mm:ss TT';
SET DateFormat='M/D/YYYY';
SET TimestampFormat='M/D/YYYY h:mm:ss[.fff] TT';
SET FirstWeekDay=6;
SET BrokenWeeks=1;
SET ReferenceDay=0;
SET FirstMonthOfYear=1;
SET CollationLocale='en-US';
SET CreateSearchIndexOnReload=1;
SET MonthNames='Jan;Feb;Mar;Apr;May;Jun;Jul;Aug;Sep;Oct;Nov;Dec';
SET LongMonthNames='January;February;March;April;May;June;July;August;September;October;November;December';
SET DayNames='Mon;Tue;Wed;Thu;Fri;Sat;Sun';
SET LongDayNames='Monday;Tuesday;Wednesday;Thursday;Friday;Saturday;Sunday';
SET NumericalAbbreviation='3:k;6:M;9:G;12:T;15:P;18:E;21:Z;24:Y;-3:m;-6:μ;-9:n;-12:p;-15:f;-18:a;-21:z;-24:y';

MANY THANKS!!

I am working on a QlikSense application which connects to a SharePoint Online list via a Rest Connector.  I need to be able to have a Query Header Name be "Authorization" and the Query Header Value set to an encryption key which will change daily.  See the highlighted section below for where I am hoping to use the variable.  Is it possible to use a variable in this field so that I do not have to manually go in every single day and set the new encryption key?  See the highlighted section below for where I am hoping to use the variable.

Hello everybody,

we performed the patching of the Qlik Sense Enterprise on Windows from version May 2021 to version November 2023 Patch 1 on our server according your recommendation.

But problem persist. 

I received information about the problem with renegotiation DoS Vulnerability from our IT department. See message below:

Hostname: qlik.xxx.ch,
Host Ip: 10.128.60.10,
Taskname: inf_DC1-PDPLEXA01,
Severity: Low,
Description: SSL/TLS: Renegotiation DoS Vulnerability (CVE-2011-1473, CVE-2011-5094)
Summary: The remote SSL/TLS service is prone to a denial of service (DoS) vulnerability.
Insight: The flaw exists because the remote SSL/TLS service does not properly restrict client-initiated renegotiation within the SSL and TLS protocols. Note: The referenced CVEs are affecting OpenSSL and Mozilla Network Security Services (NSS) but both are in a DISPUTED state with the following rationale: > It can also be argued that it is the responsibility of server deployments, not a security library, to prevent or limit renegotiation when it is inappropriate within a specific environment. Both CVEs are still kept in this VT as a reference to the origin of this flaw.
Solution: Users should contact their vendors for specific patch information. A general solution is to remove/disable renegotiation capabilities altogether from/in the affected SSL/TLS service.
Nvt: 1.3.6.1.4.1.25623.1.0.117761
CVE: CVE-2011-1473, CVE-2011-5094>
Affected: Every SSL/TLS service which does not properly restrict client-initiated renegotiation.
Detection: Checks if the remote service allows to re-do the same SSL/TLS handshake (Renegotiation) over an existing / already established SSL/TLS connection.
Descriptions: The following indicates that the remote SSL/TLS service is affected:Protocol Version | Successful re-done SSL/TLS handshakes (Renegotiation) over an existing / already established SSL/TLS connection----------------------------------------------------------------------------------------------------------------------------------TLSv1.2 | 10
Soulution Type: VendorFix,
Reference: CVE-2011-1473; CVE-2011-5094; https://mailarchive.ietf.org/arch/msg/tls/wdg46VE_jkYBbgJ5yE4P9nQ-8IU/; https://orchilles.com/ssl-renegotiation-dos/; https://vincent.bernat.ch/en/blog/2011-ssl-dos-mitigation; https://www.openwall.com/lists/oss-security/2011/07/08/2

Hostname: qlik.xxx.ch,
Host Ip: 10.128.60.10,
Taskname: inf_DC1-PDPLEXA01,
Severity: High,
Description: MacOS X Finder .FBCIndex Information Disclosure
Summary: MacOS X creates a hidden file, '.FBCIndex' in each directory that has been viewed with the Finder. This file contains the content of the files present in the directory, giving an attacker information on the HTML tags, JavaScript, passwords, or any other sensitive word used inside those files.
Insight:
Solution: Block access to hidden files (starting with a dot) within your webservers configuration
Nvt: 1.3.6.1.4.1.25623.1.0.10773
CVE: CVE-2001-1446>
Affected:
Detection:
Descriptions: The following files were identified:https://qlik.xxx.ch:4244/internal_forms_authentication/.FBCIndex
Soulution Type: Workaround,
Reference: CVE-2001-1446; http://www.securityfocus.com/bid/3325; https://www.kb.cert.org/vuls/id/177243

Does exist any solution for solving this problem?

Thank you,

Pavel