Hi,

I have a data table consisting of two fields:
OPNAME, NAMESTRING (This field consists of names separated by the sign "|")

For example:
OP1 "ABC|ABB|CVV"
OP2 "VGB|ABB"
OP3 "GGG"
I want to reverse the table so that it appears in the following format:
OP1 ABC
OP1 ABB
OP1 CVV
OP2 VGB
OP2 ABB
OP3 GGG

Thanks to anyone who can help how to do this.

Hello everyone,

We have 2 QlikSense servers in our internal infrastructure and we want to expose these 2 servers externally, through Nginx.
We would like to be able to access these servers via ourdomain.com/qliksense1 and ourdomain.com/qliksense2.
Is it possible to configure Nginx to allow this?

Furthermore, we also require virtual proxies for some of our custom apps and we would like to be able to access the virtual proxy via ourdomain.com/qliksense1/virtualproxy and ourdomain.com/qliksense2/virtualproxy.
Is this possible?

Thank you!

Dear all,

I have a T-SQL table with a list of PDFs.

Each PDF is a 1 single page encoded in varbinary max.

I was able to convert this varbinary to a base64 but I cannot display the result with 'data:image/jpg;base64' into a table.

Is there some other balise or viewer that can display base64 PDF in QlikSense ?

Or any way to convert a PDF to PNG Base64 ?

Thanks,

Sébastien

I am able to read a QVD file just fine using the Azure Store Data Connections.  But when I try to write a QVD to the Azure Store location I am getting the following error message.  The account does have RW access to the storage area.

The following error occurred:
Cannot open file:xxxxxxxxxxxxxxxxxxxx
(Native path: ***
System error: ***)

The error occurred here:
Store NewData into data connection

Thanks in advance for your help

Hi All,

I registered for the Qlik Sense Conference in Orlando 2024. The official start date of the conference is June 3rd, but I don't see any sessions available to enroll on that day. What would be the schedule for June3rd?
Thanks

Bonjour à tous,

J'aimerais pouvoir intégrer une couleur différente dans mes tableaux chaque semaine, mais ma formule ne marche pas. Est-ce que vous pourriez m'aider ?

Voici ce que je souhaite mais en semaine 

Avec ma formule, j'ai qu'une couleur qui apparait 

if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='1','#9ca2db',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='2','#9dc5e0',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='3','#a4c77b',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='4','#9de0ce',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='5','#9ee09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='6','#d7e09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='7','#fffb94',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='8','#edd182',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='9','#e0b19d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='10','#e09d9d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='11','#e09dbc',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='12','#9ca2db',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='13','#9dc5e0',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='14','#a4c77b',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='15','#9de0ce',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='16','#9ee09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='17','#d7e09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='18','#fffb94',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='19','#edd182',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='20','#e0b19d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='21','#e09d9d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='22','#e09dbc',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='23','#9ca2db',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='24','#9dc5e0',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='25','#a4c77b',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='26','#9de0ce',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='27','#9ee09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='28','#d7e09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='29','#fffb94',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='30','#edd182',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='31','#e0b19d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='32','#e09d9d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='33','#e09dbc',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='34','#9ca2db',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='35','#9dc5e0',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='36','#a4c77b',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='37','#9de0ce',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='38','#9ee09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='39','#d7e09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='40','#fffb94',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='41','#edd182',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='42','#e0b19d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='43','#e09d9d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='44','#e09dbc',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='45','#9ca2db',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='46','#9dc5e0',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='47','#a4c77b',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='48','#9de0ce',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='49','#9ee09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='50','#d7e09d',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='51','#fffb94',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='52','#edd182',
if(Week([DATE_LIVRAISON_LIVRAISON.autoCalendar.Date])='53','#F6888B','#ce9de0')))))))))))))))))))))))))))))))))))))))))))))))))))))

Merci

When I run Qlik Cloud Monitoring Apps Installer it fails if I tell it to create the APIKey. If I supply my own then it all goes through no problem.Initial setup (APIkey not supplied)QAA errors (1)QAA errors (2)Setup with APIkey supplied manually)

Hi, there,

We need to give several Qlikview users certain admin privilege on our Qlikview DEV server. Here are what we have done so far:
1. Have a new AD group 'Qlikview DEV Admin' created and have users added into it.
2. On Qlikview DEV server, added 'Qlikview DEV Admin' into the 'Qlikview Administrator' group.
3. Created a new folder on Qlikview DEV server and assigned 'Qlikview DEV Admin' access to it.
4. In QMC (System -> Setup -> QDS -> General tab -> Source Folders section), added a new Path for the folder created in previous step.

It works, but there is one issue. In QMC -> Status -> Tasks, 'Qlikview DEV Admin' can see/run all tasks. But we only want them to see the tasks under one particular category (MRx_COAR in the attached image). Is it possible to do that?

Thanks