Gauge meter boundaries

[#1]

Hi!

I have a gauge meter for "Claims". I would like the meter to be coloured red from our Target level and upwards. Say for example I have currently 8 claims (which the needle is showing) but I'd like the red colouring to start at 10 claims, thereby showing we are currently green with a slight margin until the red area starts.

I've tried by putting Segment 2 with a lower bound of 10 but the gauge meter is not accepting this, instead the whole scale of the meter (1-50) is showing green.

Any ideas on how to fix this?

Thanks in advance and Krgds,

Lennart

[#2]

Hi Sridhar,

Not able to upload my application but I have attached some pictures of my expression and presentation tab.

Thanks again for your kind support!

Krgds,

Lennart

[sridhar240784]

Please also share the Gauge Settings which is next to segment settings. Look at the attched image.

-Sridhar

[jagan]

Hi,

Everything you did correct, check Min and Max values as suggested by Sridhar.

Regards,

Jagan.

[#5]

OK, please find below. Gauge settings are the same for both Segments (1 & 2).

Thanks again and Krgds,

Lennart

[#6]

OK, thanks. Min & Max values are set at 0 & 50 for both Segments yet I still don’t get the colouring of red from 10 onwards….strange.

/L

[jagan]

Hi,

Try creating the same in another new object and remove the existing.

Regards,

Jagan.

[#8]

Still doesn’t work….

[jagan]

Hi,

If possible attach file with some sample data.  I will check it.  It works fine in our file.

Regards,

Jagan.

[#10]

Hi again Jagan,

Attached is a sample of my data….thanks again for your support, really appreciate it.

Krgds,

Lennart

[jagan]

Hi.

Please find the attached image.  It works fine in my file.

Regards,

Jagan.